You know how long it takes to roll that entire rear end outta there, with the tires still mounted, leaving the springs behind?
Answer; with an impact tool, not long; If I had a bum arm/shoulder, that's what I would do.
I put some old railway ties under the sills, just behind the CG, blocking them up as high as it takes, then dropping the front tire pressure until the rear end is high enough until the wheels have room to roll out.
I've also done it by taking the wheels off, and setting the banjo on the floor jack;
or installing a couple of bare wheels. and
I've done it by rolling it out, wheels and springs all together.
I can't imagine a method I have not used, including sliding the banjo out sideways, which works really well ........ until you go to reinstall it.
Whatever method you use; I'll drink to that!