Stop in for a cup of coffee

Any tips on downsizing this from the manifold 1" water pump 0.8?

View attachment 1716173942


Use one of these in the intake and one in the water pump if you want to use a 3/4" bypass hose:

https://www.grainger.com/product/APPROVED-VENDOR-Beaded-Hose-Fitting-For-3-6AFK4

https://www.zoro.com/zoro-select-st...-34-in-hose-id-34-in-thread-6afk4/i/G1874241/
https://www.mcmaster.com/1745N19/

Or one of these in the intake and one in the water pump if you want to use a 1" bypass hose:

https://www.grainger.com/product/APPROVED-VENDOR-Beaded-Hose-Fitting-For-1-6AFJ5

Better priced one:

https://www.zoro.com/zoro-select-straight-hose-clamp-1-in-hose-id-34-in-thread-6afj5/i/G2303086/


The barbed tip on either of these will seal better with the hose, so I recommend replacing the ones you have with one size of these...

The 1" size is much cheaper for the fittings though... You may want to check other places...