318 stalling from idle

Count the turns on the 2 idle circuit screws when turning them down to bottom.

Then take the idle circuit screws all the way out, spray carb cleaner in the 2 holes. then blow them out with compressed air after a few applications.

Polish up the needle ends of the screws with Scotchbrite pads and carb cleaner, wipe clean and reinstall to original setting depths.

Now you can fine tune them in one at a time. Screw them in until the engine starts to shudder, then back them out one full turn to give it the fuel it needs when idling.

Will help transition from idle to opening the butterflies after cleaning those ports and screws.

Good Luck

2 bbl BBD mopar stock 318 carb.


☆☆☆☆☆