Fabricated Leaf Spring Slider Brackets?
I’m going to mill a 1/4 slot on the top side of the mounting plates and the weld them on the outer edge to the plates. Then bolt them into place through the bracket and the frame. I will do that when I mock up the rear end with the suspension so I know where to locate the mounting point for a forward and back adjustment.
I’m going to mill a 1/4 slot on the top side of the mounting plates and the weld them on the outer edge to the plates. Then bolt them into place through the bracket and the frame. I will do that when I mock up the rear end with the suspension so I know where to locate the mounting point for a forward and back adjustment.
