Replacing Instrument Cluster bulbs with LEDs - Illumination Detail Question - 67 Barracuda

Sounds like some basic tests might be useful to solve your problems.

1. Do your bulbs light up if you short across the two flasher terminals with the turn signals on? Is they do, your flasher is likely bad or hooked up wrong.

2. Can you hook up your flasher and a bulb in series directly across the battery to see if it flashes?

A lot of chinesium stuff is bad out of the box. Divide and conquer. Check all your parts first to see if they are good.

It is also possible that the two flasher wires are reversed in the flasher connector.
The front turn sisgnal are just fine once I cleaned them up as posted.
And, once I got the bulbs all the way in correctly, they work fine.
So, I feel no need to clutter up the front end any more with load resistors or flashers.

Less than 24 hours, and Superbrightleds has already responded to my trouble shooting question on the taillights.
I will update once they work with me.