Need Help Tracking Down Pistons For Low Compression 408 Stroker

Hello everyone,

I have a bit of an oddball situation here and I'm hoping to find off the shelf pistons that fit my needs, but so far have been unsuccessful. I am hoping you fellers can help.

Here's the deal:
360 magnum block at standard 4" bore (measured within spec and doesn't need bored) and standard deck (deck is also dead flat).
Piston made for stroker, so something probably in the 1.45" compression height range
Dish in the 30cc range
Quench pads that vaguely match the magnum head's quench pads would be ideal, but I'm willing to compromise on this
Hyper pistons are fine for this application, though if I have to pay slightly more for forged just to get the correct specs I will, though the cost for custom pistons is a no go

The biggest dish I can find in a standard bore piston is KB's 416s which is 25cc, which I could get away with if I can't find a bigger dish. Icon has the IC982 which is a 34cc dish but it's only available in overbore sizes.

Thanks in advance!