compression or flow?

I’m running 11.2cr 200/205 cranking psi on a 360, with home ported J,s what do they flow?? I don’t know probably not much 230’ish.. so for an ill flowing head you better run some decent compression to squeeze what little you have in that cyl !! Now if I had ported W2’s I would not have milled them down to the 59cc my J’s have knowing I’m going to fill the cylinder especially at upper rpms. That said a junky, fussy, rascal of a setup like mine still will roast the 28” drag radials with 3.55 gears for a block. So I guess what I’m saying is go with the W2’s get your static in the 10,25 to 11.0 range call a good cam company like Bulit or Howard and they can get you something made that will give you around 185/190 cranking psi. Todays Pump gas is not as bad as everyone says, the worse part is the lower boil/heat soak temps at 170. Good luck !!