Trick Flow harmonic balancer install

Thanks, yep, 1/4" didn't make much diff at all. Not sure where 0.04" came from? My verniers are only 6", but my measuring I fingered was close enough.
If you do the math backwards based on 0.04....
360*×0.04= 14.4"
14.4÷pi(3.14)= diameter
4.5"???
Newbomb Turk said
Never had one of those dampers in my hands but…every other damper I’ve ever seen was 7.25 inches.

And I just ran the math and it didn’t really make a pinch of poo difference. So you are golden.

I figured that quarter inch would make more than a couple of thou difference. The math says I was wrong.
Click to expand...