Installed 1970 duster front bumper 0n my 1975 duster
Installed 1970 duster front bumper and brackets 0n my 1975 duster went on with only one mod so far removed bumper shocks and put two 1/2 with 3/4 head bolts
that came off the car cut the press on washers that were cracked and replace them with thick cat washers that i made flat on top and bottom to pass the washer through the hole in the front and bottom of the frame and put the bumper brackets on them with new nuts and washers . used old bumper that i had for fitting it is bent and twisted have a good on that will go on for final fit . did have to bend the point nose on the header panel
down so it would tuck under top of bumper you can see it hits the two bars in the back will be putting four flat washers only on the top four bumper bolts to shim it .
Installed 1970 duster front bumper and brackets 0n my 1975 duster went on with only one mod so far removed bumper shocks and put two 1/2 with 3/4 head bolts
that came off the car cut the press on washers that were cracked and replace them with thick cat washers that i made flat on top and bottom to pass the washer through the hole in the front and bottom of the frame and put the bumper brackets on them with new nuts and washers . used old bumper that i had for fitting it is bent and twisted have a good on that will go on for final fit . did have to bend the point nose on the header panel
down so it would tuck under top of bumper you can see it hits the two bars in the back will be putting four flat washers only on the top four bumper bolts to shim it .