Lower control arm stiffening plates

Tony Barracuda said
When adding the end plates where the torsion bar levers are
how free should the levers be to rotate ? i added the end piece
and one still has a little play and the other is pretty tight. So the lever
doesn’t move as freely as the other.

When the suspension is loaded the adjuster lever and LCA move together. The only time the lever and LCA move separately from each other is when you’re adjusting the position of the lever to set the ride height. So there really doesn’t need to be any play between the lever and LCA at all. I usually set them up so they turn without any resistance, but there’s no real side to side play at all.