4-bar / back half the HemiDenny / HDK way
while in mock up the 6.4 / 8HP70 fit with a 2.5 degree downward angle....it was tight. Since the shell was at the fab shop and on the rotisserie, I decided to do a small trans tunnel mod for additional tunnel clearance and slightly less driveline angle.
while in mock up the 6.4 / 8HP70 fit with a 2.5 degree downward angle....it was tight. Since the shell was at the fab shop and on the rotisserie, I decided to do a small trans tunnel mod for additional tunnel clearance and slightly less driveline angle.