This is a Holley Sniper X Flow on a 505 inch Mopar big block. This engine is a little more radical than most street/strip builds. The owner went with higher than usual compression ratio, used Trick Flow 270 heads and installed a 264/268 solid roller cam. The nice thing about the Sniper+Hyperspark combination is that we were able to build ignition and AFR tables to make the car fairly drivable. The owner did need to swap the factory four speed for a 727 since there just wasn't anyway to drive the car with a clutch. We did this project a couple of years ago. I can drag up a few more pictures if there is any interest. It is a B body but that shouldn't matter in this forum since the focus is on the fuel system.
