Building a new 505 With Callies / Mopar Performance Block

SMCARNUT said
I am taking the heads to machine shop to get .040 taken off of the deck surface and .048 off of the intake surface this weekend. Then I will remeasure pushrods when they are back on the block without checking springs. Hopefully I will get them back in the next week or two. Most shops are really busy. I will keep everyone posted.
I am leaning towards Manton or Smith Brothers for the pushrods once the length is confirmed after the heads come back from the machine shop.
Click to expand...
Definitely double check the length, when I surfaced my trickflows .080 my pushrods still worked with the hs rockers. I think the 3/8 is a good fit in the tf heads. Originally I ran a hd 5/16 and they were showing stress marks from deflection I assume.