65 Dart Wagon Conversion to a Sedan Delivery
CONTINUED From Post #1012
Installed the felt I received around the spring frame perimeter.
Next was to install the foam and hog ring the muslin sheets I previously glued to the foam to the appropriate areas on the frame
Next was to hog ring the 2 side and front listing wire in the upholstery to the wires previously hog ringed to the springs and through the burlap. Then with a lot of grunting, pushing on the foam to get the upholstery over the foam in the corners and down the sides, tugging and pushing at the same time and with some help from my trusty helper (the wife), i was able to get the upholstery on and hog ringed to the frame. I ended up with some wrinkles on the side bolsters. I’ll let it sit in the afternoon sun for a few days and if needed, redo the hog rings on the sides one at a time
Before and After
TO BE CONTINUED
CONTINUED From Post #1012
Installed the felt I received around the spring frame perimeter.
Next was to install the foam and hog ring the muslin sheets I previously glued to the foam to the appropriate areas on the frame
Next was to hog ring the 2 side and front listing wire in the upholstery to the wires previously hog ringed to the springs and through the burlap. Then with a lot of grunting, pushing on the foam to get the upholstery over the foam in the corners and down the sides, tugging and pushing at the same time and with some help from my trusty helper (the wife), i was able to get the upholstery on and hog ringed to the frame. I ended up with some wrinkles on the side bolsters. I’ll let it sit in the afternoon sun for a few days and if needed, redo the hog rings on the sides one at a time
Before and After
TO BE CONTINUED