65 Dart Wagon Conversion to a Sedan Delivery
CONTINUED FROM THE PREVIOUS POST:
In addition to adding heated seats, for my driving comfort I am adding an aftermarket power lumbar setup to the driver's seat. I installed the pump to the under side of the seat springs
The pump feed at the bottom on the protective bag will be routed to the bladder on the seat back. The wiring harness is pretty simple - a red power wire to the dash harness and a black ground wire. The harness branches off to a momentary switch - one way pumps up the bladder; the other allows it to deflate.
I will mount it on the driver’s side where the for and aft lever and button normally goes. It’s not needed since the seat frame will be installed to a power rack. When it gets warmer all the seat’s tin will get painted to match the seat upholstery - light metallic blue
CONTINUED FROM THE PREVIOUS POST:
In addition to adding heated seats, for my driving comfort I am adding an aftermarket power lumbar setup to the driver's seat. I installed the pump to the under side of the seat springs
The pump feed at the bottom on the protective bag will be routed to the bladder on the seat back. The wiring harness is pretty simple - a red power wire to the dash harness and a black ground wire. The harness branches off to a momentary switch - one way pumps up the bladder; the other allows it to deflate.
I will mount it on the driver’s side where the for and aft lever and button normally goes. It’s not needed since the seat frame will be installed to a power rack. When it gets warmer all the seat’s tin will get painted to match the seat upholstery - light metallic blue