Who knows about turn signal wiring?
FIXED!!!! So reading through the thread supplied by @Dana67Dart.... @67Dart273 suggested this idea above. FYI back when I originally wired this up I did map the wires to see what was what and that is how I determined how to wire the lights to the column to get the signals to flash but I could not determine how or which wire was responsible for the brake signal wire through the column hence i wired the brake light separately and all worked well except the issue I had where the brake signal over rode the signal when brakes were applied. Anyway I purchased a converter ( some make think this is cheating) but for 37 bucks my problem is solved. I installed the converter box, removed the existing diodes I had and it works mint! So thanks to all that posted to help and hopefully this might help someone else facing a similar issue. I'll post pics of the unit I used.
