Test test test

As I’ve told a few of you guys I’ve struggled on back to back sets of heads. One a set of 2.08 with a customer that wants to run a 4.080 head gasket and now a set of 2.055 valve heads with a 4.120 head gasket size. Seeing me struggling he’s open to a bigger gasket. So I took a couple days to pout, almost throw things, and a lot of thinking. I grabbed my son Ethan set of 2.02 valved heads tonight because they are already tubed, set the runner to 2.055 sizes, cut a 2.055 seat on that runner, and blended the valve job. So hopefully tomorrow four different flow tests will be done on what I hope I came up with to fix the smaller head gasket issues. Final two test will be with the 4.180 ( felpro) size. I’ll either be extremely happy or madder than a bunch of pissed off hornets. After this is two sets with stock 2.02 valves but one of the customers is second guessing his choice and may go with a 2.055 valve. Because I modified Ethans head he will be getting a nice set of 2.055 heads now.