New here with carb / stalling issues

Welcome

Ethanol gas draws moisture right out of the air. That in turn reacts to the aluminum carb body and turns to a white powder as the fuel evaporates out and it sits for long times. This plugs the jets when new fuel is introduced.

First thing I noticed was > Oh, it's a Holley....

I know with the Edelbrocks you can clean the 2 front idle enrichment ports (screws) with carb cleaner and compressed air. Also they are easy to pull the tops off, blow out with compressed air, then carb cleaner, then blow the 2 main jet runs with compressed air to make sure they are blowing clean an not plugged.

Same with the Holley can carefully take the bowls off and clean things out.

Betting the idle circuits are plugged when it dies at idle.


☆☆☆☆☆