1968 DART REVERSE LIGHT SWITCH CONNECTOR LOCATION
The switch is on top of the column held in with two screws. This is '67
It needs the plastic actuator pin to work.
https://www.forabodiesonly.com/mopar/threads/67-reverse-light-actuator-pin.435159/
Black ('68) is new replacement. The extension pushes in to spread the prongs.
White ('67) is used with the retaining prongs broken off.
Functionally the same.
The white wire is hot with the key in run or accessory.
If someone has changed the transmission to a later one, or has the later rooster comb in it, then the combo neutral safety switch/reverse light switch can be used.
https://www.forabodiesonly.com/mopa...estion-trans-pig-tail.473313/#post-1973134578
Print