Ill try to keep it short. The car is a Dodge Dart Sport 340. I'm doing a refresh on my 340 (1969 engine), here is how its going together. 340 bored .030, zero decked, closed chambered SM heads .03 head gasket. I have a Holly Strip Dominator intake with a Barry Grant 750 DP. Looking for a dual plane now. Crane 1.6 roller adjustable rockers. The block combo should yield a static compression ratio of about 10 to 1. The car is roughly 3700 LBS, 4 speed, 355 gears, tires have yet to be decided. I decided to use a Hughes Engine cam and lifter set. I sent the information to Hughes and the recommendation I got was the SEH 3236AL8. I called to order it, they said they didn't have it and don't know when it will be in. I was told they just received some today and to call back Wednesday to see if one arrived. This car will be a street cruiser, car shows and the like, maybe a few trips down the strip, its close by. Anybody have any recommendations if they don't have the one recommended. No power brakes... Thanks guys.
View attachment 1716226988