Hey, did some homework for you.
Call Howard and ask to adjust the 110 to a 108. Comp cams did it for me.
Specs close enough? (Link at the bottom.)
Lift: .531 / .547, Duration @ .050: 230 / 236, Centerline: 106, Lopey idle, Strong mid-range, Good throttle response, 2400+ stall converter.
Hydraulic Flat Tappet
Basic RPM Range: 2600 to 6200
Valve Lift Intake .531 (1.6 - .566)
Valve Lift Exhaust .547 (1.6 - .583)
Duration Intake 277
Duration Exhaust: 283
Duration at 050 Intake: 230
Duration at 050 Exhaust: 236
Lobe Separation 110 Intake Centerline 106
Hydraulic Flat Tappet Camshaft; 1964 - 2003 Chrysler 273, 340, 360 2600 to 6200 Howards Cams 710581-10 | Howards Cams
I want to express that your car is heavy at 3700lbs.
I would make use of the RPM-AG and with some EZ DIY porting as far up as you can get it done.
