'69 Barracuda door glass, front up stop?

340sFastback said
Loosened it all up, tugged vent window around. Struggled to get it tilted back and contact A pillar seal. Got it best I could. Massive improvement.

I did confirm loosening rear track pull it up/down changes up stop some adjustment is there.

Opened door, held thin paper around seal, closed door, confirm paper is being squeezed at the various areas. Appears to be sealing.

Thanks all for the suggestions.

View attachment 1716227779

View attachment 1716227780

View attachment 1716227781

Great to hear 340fastback!

Now I have another tip for you to help seal the glass even better.

See the chrome moulding that is attached to the roof and is used to hold the roof rail rubber gasket?

If you have had that down, you will see a styrafoam gasket that fits between the stainless roof rail moulding and the roof. As it ages this gasket gets compressed flat and opens up the gap.

What I did was double up that styrafoam (there are other materials you can use to do this) . This effectively dropped the stainless roof rail moulding and subsequently the rubber gasket down another 1/8 of an inch. In my case I got a near perfect seal.

Hope this helps.

Cheers!!

BTW, Heres a pic of the gasket .Its the white one in the pic.