Front & Rear Spoiler Recommendations
Wow, I'm surprised the modern Challenger spoiler works that well on the back! That looks like it belongs there.
Can't really say the same about the front though, the most useful place to block air on the front is in the middle. More surface area to prevent the front end from lifting, better air flow through the valance etc. I like the Road Runner spoilers where they mount on the Road Runner's, especially the '71/72 version, out on the fenders. Still not the best from an aerodynamic standpoint, but at least on the Road Runners not having anything in the middle makes sense because of the parking lamps and lower grille in the valance.
I run an OER '67 Camaro spoiler on the front of my Duster/Demon tribute. It's ABS so it's durable and although it isn't a perfect profile match to the front valance it fits well enough, a little heat gun action and it fits great. It is a little narrow, but for $30 it's hard to go wrong. Eventually I'll make one that looks more like the AAR/TA E-body front spoilers did, but until then the Camaro one does everything it needs to. The '69 Camaro version isn't quite as tall as the '67, but it is a little bit wider.
CHEVROLET CAMARO OER 3916673 OER Injection-Molded Front Spoilers | Summit Racing
Next version will look more like this
As far as the Camaro hate, only the purists get wadded up about it. It's a piece of plastic. These cars never came with a front spoiler, the Direct Connection piece didn't come out until years later. And of course those will set you back a ton of money for an original. Heck even the fiberglass reproductions out there are a couple hundred bucks. If I bump a parking stop with the ABS one it's no harm no foul, and even if I clobber one it's $30 to replace it.
Wow, I'm surprised the modern Challenger spoiler works that well on the back! That looks like it belongs there.
Can't really say the same about the front though, the most useful place to block air on the front is in the middle. More surface area to prevent the front end from lifting, better air flow through the valance etc. I like the Road Runner spoilers where they mount on the Road Runner's, especially the '71/72 version, out on the fenders. Still not the best from an aerodynamic standpoint, but at least on the Road Runners not having anything in the middle makes sense because of the parking lamps and lower grille in the valance.
I run an OER '67 Camaro spoiler on the front of my Duster/Demon tribute. It's ABS so it's durable and although it isn't a perfect profile match to the front valance it fits well enough, a little heat gun action and it fits great. It is a little narrow, but for $30 it's hard to go wrong. Eventually I'll make one that looks more like the AAR/TA E-body front spoilers did, but until then the Camaro one does everything it needs to. The '69 Camaro version isn't quite as tall as the '67, but it is a little bit wider.
CHEVROLET CAMARO OER 3916673 OER Injection-Molded Front Spoilers | Summit Racing
Next version will look more like this
As far as the Camaro hate, only the purists get wadded up about it. It's a piece of plastic. These cars never came with a front spoiler, the Direct Connection piece didn't come out until years later. And of course those will set you back a ton of money for an original. Heck even the fiberglass reproductions out there are a couple hundred bucks. If I bump a parking stop with the ABS one it's no harm no foul, and even if I clobber one it's $30 to replace it.
