1974 Dart 318 crank, but no start (Solved)

[1] Remove dist cap & crank engine to make sure rotor rotates. Check rotor for carbon tracking.
[2] Dist rotates. Remove dist, but first note position. Measure from vac adv nipple to f/wall or similar; note where rotor points. Connect DVM to dist p/up wires, select AC volts. Depending on how fast you spin the shaft, you should get from millivolts to a few volts if p/up is working. Wiggle wires while doing this to check for a broken wire.
[3] Say a prayer to Allah....