Dash Speakers
Maybe someone else might want to do the same so I will post up what I did for dash speakers. I fabricated a bracket to hold two 4 inch speakers in the center of dash where original single speaker was. I had some 16 gauge aluminum sheet laying around bend a lip around outer edges to add rigidity. Used a 4 inch hole saw from Home Depot to cut the holes. Note speakers are shallower then most out there to clear the HVAC controls in the dash. There are two existing studs up under dash where original speaker mounted.
Maybe someone else might want to do the same so I will post up what I did for dash speakers. I fabricated a bracket to hold two 4 inch speakers in the center of dash where original single speaker was. I had some 16 gauge aluminum sheet laying around bend a lip around outer edges to add rigidity. Used a 4 inch hole saw from Home Depot to cut the holes. Note speakers are shallower then most out there to clear the HVAC controls in the dash. There are two existing studs up under dash where original speaker mounted.
