Wheel hub questions for 10 inch drums
Well I got it figured out. Thanks to @CFD244 for the hubs I was able to put new bearings, races and studs onto the new hubs without a hiccup. Also installed new brakes and hardware for the car. First picture is the carnage on the old hub that I found, you can see the allowed out area where the race would sit. The second is the holesaw I used to cut the old swaged bit of the studs out. And the 3rd is the end result before hammering them out!
Well I got it figured out. Thanks to @CFD244 for the hubs I was able to put new bearings, races and studs onto the new hubs without a hiccup. Also installed new brakes and hardware for the car. First picture is the carnage on the old hub that I found, you can see the allowed out area where the race would sit. The second is the holesaw I used to cut the old swaged bit of the studs out. And the 3rd is the end result before hammering them out!