Comp Camshaft 20-245-5 (The Good Early CWC Casting) for A Engine
Here is the Duplicate to the Camshaft Profile in my 10 Second Street Driven (Hydraulic Lifter)
thru the Mufflers pump gas 360 Valiant.
We tested nearly a Dozen Camshafts and this one was clearly the very best!
DO NOT Buy any of Comp Camshafts built the last number of years. I have found
the cheap casting cores to often go flat before they are even broken in with the 120 to
140 seat pressure and 300 open that they require to operate properly.
This cam was made in 2018 when they were still using CWC top Quality Cast Billets that
were American made. That is exactly why i have been keeping it! Really most of the Cam
Companies have gone to junk Chinese Core the last few years to save a couple dollars. If I am forced
to run them = I have to run super light springs to break them in and even then cross my finger when i
change to needed spring pressure. If the cam goes flat = I have to completely rebuild the whole engine
due to metal getting everywhere.
I run an extremely close lobe center of 106 like the Circle track guys as it makes a big difference
in mid range torque!
Specifications in the pictures:
Price: $195.00
Plus $24.00 Shipping
Here is the Duplicate to the Camshaft Profile in my 10 Second Street Driven (Hydraulic Lifter)
thru the Mufflers pump gas 360 Valiant.
We tested nearly a Dozen Camshafts and this one was clearly the very best!
DO NOT Buy any of Comp Camshafts built the last number of years. I have found
the cheap casting cores to often go flat before they are even broken in with the 120 to
140 seat pressure and 300 open that they require to operate properly.
This cam was made in 2018 when they were still using CWC top Quality Cast Billets that
were American made. That is exactly why i have been keeping it! Really most of the Cam
Companies have gone to junk Chinese Core the last few years to save a couple dollars. If I am forced
to run them = I have to run super light springs to break them in and even then cross my finger when i
change to needed spring pressure. If the cam goes flat = I have to completely rebuild the whole engine
due to metal getting everywhere.
I run an extremely close lobe center of 106 like the Circle track guys as it makes a big difference
in mid range torque!
Specifications in the pictures:
Price: $195.00
Plus $24.00 Shipping
