67 and 69 Barracuda back-up light
Finally I have an update!
I was able to test fit the holders on a 67 and a 69.
On the 69 the bulb holder has no interference (deeper chrome bezel) but it does come close to the hole in the rear crossmember (turns out the OEM units do to)
On 67 the bulb holder ALMOST touches with the hole in the rear crossmember (Just like the OEM units do.)
I have made an update the the holder moving the bulb socket about 3/16" farther away from the hole in the rear crossmember.
I'm printing a prototype and will test fit it when time allows.
Red is the OEM spec bulb holder
Green is the modified bulb Holder
Finally I have an update!
I was able to test fit the holders on a 67 and a 69.
On the 69 the bulb holder has no interference (deeper chrome bezel) but it does come close to the hole in the rear crossmember (turns out the OEM units do to)
On 67 the bulb holder ALMOST touches with the hole in the rear crossmember (Just like the OEM units do.)
I have made an update the the holder moving the bulb socket about 3/16" farther away from the hole in the rear crossmember.
I'm printing a prototype and will test fit it when time allows.
Red is the OEM spec bulb holder
Green is the modified bulb Holder
