Project "Chihuahua" '65 Formula S Restoration "Estilo Mexicano"
Update: Installing some logo callouts today. First tried installing the fender "Barracuda" logo using some fiber washers as cushions, but they turned out to be too thick (photo #1). The holes were too small due to the repaint so I used a sheet metal screw to open them up (photo #2). Decided to use thin rubber matting material cut into little circles (photo #3). Same with the Chrysler pentastar. These pieces are not "restored", just going on as is for now (too many parts scattered all over the place around here).
Update: Installing some logo callouts today. First tried installing the fender "Barracuda" logo using some fiber washers as cushions, but they turned out to be too thick (photo #1). The holes were too small due to the repaint so I used a sheet metal screw to open them up (photo #2). Decided to use thin rubber matting material cut into little circles (photo #3). Same with the Chrysler pentastar. These pieces are not "restored", just going on as is for now (too many parts scattered all over the place around here).