Cold Case Radiator Hoses
I just remembered that I have a similar setup in Hoopty.. Lower hose location anyway.
I just used what I had off the donor car. The lower hose was a stock hose for an oil cooler setup. I cut into 3 pieces.. Section before splice, the splice and section after the splice. I just kept trimming the rubber until the pieces made what I needed, using the oil cooler section as the splice. Unfortunately I don't have a good Pic of the hose installed.. Just this teaser pic
If you don't have an oil cooler, just grab a splice off Amazon.. 10 bucks. Also, if you've never tried the gates heat shrink clamps, they're awesome
If you need an oil cooler, let me know.. I got one for ya.. Probably won't fit on a stock K tho
I just remembered that I have a similar setup in Hoopty.. Lower hose location anyway.
I just used what I had off the donor car. The lower hose was a stock hose for an oil cooler setup. I cut into 3 pieces.. Section before splice, the splice and section after the splice. I just kept trimming the rubber until the pieces made what I needed, using the oil cooler section as the splice. Unfortunately I don't have a good Pic of the hose installed.. Just this teaser pic
If you don't have an oil cooler, just grab a splice off Amazon.. 10 bucks. Also, if you've never tried the gates heat shrink clamps, they're awesome
If you need an oil cooler, let me know.. I got one for ya.. Probably won't fit on a stock K tho
