PLEASE HELP IM IN DIRE STRAIGHTSNo spark MSD but test fine what am i missing!
Would be good to isolate your MSD wiring layout from the factory wiring.
Like use a Relay to power full 12 volts "from the battery" (with fuse) triggered by factory switched ignition wire.
Want to check the Alternator output volts and battery voltage with the engine running when you are done.
Hopefully it's 13.5 -14.5 when you check. Too low or too high is not good.
☆☆☆☆☆
Would be good to isolate your MSD wiring layout from the factory wiring.
Like use a Relay to power full 12 volts "from the battery" (with fuse) triggered by factory switched ignition wire.
Want to check the Alternator output volts and battery voltage with the engine running when you are done.
Hopefully it's 13.5 -14.5 when you check. Too low or too high is not good.
☆☆☆☆☆