Magnum and Wiring Swap
The new MAP sensor is waiting for me to finish up some other things I wanted to fix while waiting for parts. There were a couple of things that were wired wrong in the dash harness and I needed to make a bracket to hold the Dakota's multi function switch.
![1000003980.jpg 1000003980.jpg](https://www.forabodiesonly.com/mopar/attachments/1000003980-jpg.1716259304/)
Since I wanted to keep the internet wiper function and module, I couldn't think of a way to make it work without the multi function switch. I gutted a spare Dart wiper switch and drilled the end of the stalk for the shaft.
![1000003981.jpg 1000003981.jpg](https://www.forabodiesonly.com/mopar/attachments/1000003981-jpg.1716259306/)
I drilled and tapped the end of the plastic stalk for the threaded pin to go through the original shaft.
Then I put it together and test fit everything to a spare dash then I CAD, Cardboard Aided Drafted some cardboard to see if it would work.
![1000003994.jpg 1000003994.jpg](https://www.forabodiesonly.com/mopar/attachments/1000003994-jpg.1716259308/)
My idea worked, but I wasn't happy with how the 1/16th aluminum bracket turned out. I couldn't find the 1/32nd stainless I thought I had, so I used some .028" stainless and hacked out another bracket.
Top view.
![1000004010.jpg 1000004010.jpg](https://www.forabodiesonly.com/mopar/attachments/1000004010-jpg.1716259309/)
Rear and side views.
![1000004008.jpg 1000004008.jpg](https://www.forabodiesonly.com/mopar/attachments/1000004008-jpg.1716259312/)
It will be a tight fit with A/C box and much thicker wiring harness, but I think it will work. I'll find out soon enough.