1968 Plymouth Valiant First Gen HEMI
I found an intake……small world, but the guy I bought it from is the same one I got a 392 oil pan from last fall. He had a Wieand WC2QE which was the one produced before Holley bought out Weiand. He was more than fair on the price so we made a deal on it. As I figured, it’s the lowest of the 3 intakes.
https://flic.kr/p/2pVgXDv]
DC1[/url] by https://www.flickr.com/photos/153889607@N08/]M Patterson[/url], on Flickr
https://flic.kr/p/2pVj6Kv]
DC2[/url] by https://www.flickr.com/photos/153889607@N08/]M Patterson[/url], on Flickr
I had originally thought about running the pair 550 AFBs I have, but I had shelved them in favor of the pair of 650 AFBs because of how much better the old 57 ran with the bigger carbs. This 354 is built pretty close in specs to the one in the 57 so I ordered a second 650 AVS2 to go with one I already have.
Building fuel lines and linkage was pretty straight forward.
https://flic.kr/p/2pWe3VW]
intake carbs[/url] by https://www.flickr.com/photos/153889607@N08/]M Patterson[/url], on Flickr
That left starting on the air cleaner. Modifying the base got it reasonably low, and for now this is the way it sits. I’m going to have to wait to finalize it until we get the engine in the car and a hood back on (I may run into wiper motor interference with it as far back as it is). I can possibly go 1 to 1½” lower by changing out the top and dropping the base a bit more but that remains to be seen.
https://flic.kr/p/2pWgbq4]
DQ AC[/url] by https://www.flickr.com/photos/153889607@N08/]M Patterson[/url], on Flickr
The big project for today was to get the mock-up motor and trans out of the car and get the K member out. The next few day will probably involve final welding the mounts and grinding the mounts, cleaning and painting it to get it ready to go in the green car.
https://flic.kr/p/2pWqiuY]
K Member[/url] by https://www.flickr.com/photos/153889607@N08/]M Patterson[/url], on Flickr
I found an intake……small world, but the guy I bought it from is the same one I got a 392 oil pan from last fall. He had a Wieand WC2QE which was the one produced before Holley bought out Weiand. He was more than fair on the price so we made a deal on it. As I figured, it’s the lowest of the 3 intakes.
https://flic.kr/p/2pVgXDv]
https://flic.kr/p/2pVj6Kv]
I had originally thought about running the pair 550 AFBs I have, but I had shelved them in favor of the pair of 650 AFBs because of how much better the old 57 ran with the bigger carbs. This 354 is built pretty close in specs to the one in the 57 so I ordered a second 650 AVS2 to go with one I already have.
Building fuel lines and linkage was pretty straight forward.
https://flic.kr/p/2pWe3VW]
That left starting on the air cleaner. Modifying the base got it reasonably low, and for now this is the way it sits. I’m going to have to wait to finalize it until we get the engine in the car and a hood back on (I may run into wiper motor interference with it as far back as it is). I can possibly go 1 to 1½” lower by changing out the top and dropping the base a bit more but that remains to be seen.
https://flic.kr/p/2pWgbq4]
The big project for today was to get the mock-up motor and trans out of the car and get the K member out. The next few day will probably involve final welding the mounts and grinding the mounts, cleaning and painting it to get it ready to go in the green car.
https://flic.kr/p/2pWqiuY]