speedometer cable pinion seal leak

65 Dartman said
That’s what the 65 TSM aays. If you’re getting oil outside of the câble, then I’d suspect either a bad outer seal (large O Ring) or the sleeve assembly is defective. A new cable assembly (if you can find one) and seal likely would fix the issue. If fluid is weeping up the inside of the cable, then replacing the inside pinion seal with the lip towards the Cable housing Is the fix. Good luck on the repair

Thanks Dartman,
I replaced the large outer seal o-ring and the assembly is dry around it at the case.
It has to be getting thru the cable housing assembly.
Could you or anyone confirm this is the lip side of the seal in the picture?