Lower bumpstop travel
I cut mine down by about an inch, then I drilled a hole in it to make it a bit more progressive if I did make contact, kind of like this:
PRO TIP: put the bump stop in the freezer overnight before attempting to cut it. I used a coping saw to cut it and a regular drill bit. you may have to re-freeze after each step to stiffen it back up.
I cut mine down by about an inch, then I drilled a hole in it to make it a bit more progressive if I did make contact, kind of like this:
PRO TIP: put the bump stop in the freezer overnight before attempting to cut it. I used a coping saw to cut it and a regular drill bit. you may have to re-freeze after each step to stiffen it back up.