Trouble Installing 18 spline A-833 through dual disc clutch assy.

I went through this whole mess when I put the QuickTime bell on my Dart with an 18 spline input on my Jerico.
If you have the CF106 fork (which is 12.5" long) you have the wrong fork for the QuickTime fork pivot, you need the CF702 fork (10 7/8" long) to center the throwout bearing.
Plus a 1/4 to 3/8 shim and longer bolts between the pivot and the bellhousing to move the fork out far enough so the fork does not hit the bell before it fully disengages the clutch.
I had my trans in and out at least a dozen times before I got that whole mess straightened out.
Your next big hertel will be the torque shaft alignment, the Quick Time bracket for the pivot ball was not even in the same neighborhood, had to make my own.
Your going to have to brace up the starter mount on the bell to, to keep that from flexing. Other than that at least it lighter than all the other blowproof bells that are out there.