Stroker's 68 Barracuda
So I decided to do the has piston hood hinge thing. My original hinges were questionable and best, the springs were tight, and the drivers side was bowing out when closing the hood.
I've yet to install the hood on these, so I don't have an after thr fact report. Will soon.
It's not in yhese images, but on the pivot shaft up near thr cowl I ended up using 1/2" ID nylon washers on the insde and outside, then capped it off with a 1/2" collar with a set screw.
Been plumbing on the brakes. I bought a kit from Summit and realized after the fact that the only line in the kit that works for me is the front to back piece and the front left and right.
If anyone reading this needs the rear axle brake lines, master cylinder brake lines for 68 A-body. I'll make a deal. They are in mild steel.
Not sure how much I like this. I converted my fuel sender to -AN and rolled out a new steel fuel line down the rocker.
Kind of all over the place this week. There's the dash. I dumped my design and bought a Classic Dash insert. Fits nice.
So I decided to do the has piston hood hinge thing. My original hinges were questionable and best, the springs were tight, and the drivers side was bowing out when closing the hood.
I've yet to install the hood on these, so I don't have an after thr fact report. Will soon.
It's not in yhese images, but on the pivot shaft up near thr cowl I ended up using 1/2" ID nylon washers on the insde and outside, then capped it off with a 1/2" collar with a set screw.
Been plumbing on the brakes. I bought a kit from Summit and realized after the fact that the only line in the kit that works for me is the front to back piece and the front left and right.
If anyone reading this needs the rear axle brake lines, master cylinder brake lines for 68 A-body. I'll make a deal. They are in mild steel.
Not sure how much I like this. I converted my fuel sender to -AN and rolled out a new steel fuel line down the rocker.
Kind of all over the place this week. There's the dash. I dumped my design and bought a Classic Dash insert. Fits nice.