Finally getting the pulleys on the motor and well... the pulleys for the crank and water pump hit each other and both cannot be bolted on together. I bought these pulleys a good while ago and they are supposed to be for a 318, 340, or 360 with A/C. I have been trying to keep stuff like this correct enough for the 73 model year for my Dart /6 to 318 conversion and going with factory A/C and P/S and whatever is similar, so now I need to find out what the actual pully sizes should be.
What I have:
Crank diameter 7 1/4 - 7 3/8"(3 groove) 3 1/8" maybe deep.
Water pump diameter, 6.5"(single groove) 2 1/8" deep.
Belt alignment looks like it may be ok by eye, but I really don't know for sure.
I don't know if one or both are wrong, any help with the measurements is appreciated.