Petronix Electronic Ignition Any Good?

I have installed a Pertronix D141710 dist with the ignitor 2, and the correct matching coil 45111, 45,000 volts with the .6 ohms in my 69 cuda, 318 auto , as I was told by there tech. line to use, have been unable to get the car to run, have been tracing down what may be the problem, was told need full 12 volts to coil, so I remove the resister block and have the start/run wires hooked together so I have power all the time. Just was in contact again with there tech. support he emailed me a list of items to check with a ohm meter for correct values so I will see that leads me to hopefully can fine the issue.