3 Speed Wiper Motor Question

Bruce from @ns1aar does them.
Home
So this is for the motor, however the wires from the switch should essentially go to the motor except for the power in.

MOPAR 3 SPEED WIPER MOTOR BENCH TEST



  • High Speed
  • Connect jumper wire from motor case to battery ground
  • Connect second jumper wire from battery positive to BROWN lead
Motor should run on high speed continuously


  • Low Speed
  • Connect jumper wire from motor case to battery ground
  • Connect jumper wire from GREEN wire to batter ground
  • Join the BROWN and RED wires together and connect to battery positive
Motor should run on slow speed continuously

  • Park
  • Connect jumper wire from motor case to battery ground
  • Connect jumper wire from GREEN to BROWN
  • Connect jumper wire from RED to ground
  • Connect jumper from BLUE to positive
thanks for the reply i will have to get it out and test it, is there any trick to get it without taking out the heater box?