What would it take to make 1.44 lbs-ft per cid ?
I'm wondering what would it take to make a pump gas 365 engine make about 526 lbs-ft @ 4,000 rpm and 514 hp @ 5,900 rpm basically a very similar power curve to the Trick Flow 408 in the dyno graph I'm using as a theoretical goal, doesn't have to use any of the same parts just probably make a very similar power curve basically what heads and intake and what mods would need to be done to them to reach the VE% & efficiencies to have very similar power curves at similar rpms as this 1.29 lbs-ft per cid 408 or as close you think you could get?
A decent 365 should be able to make 450 lbs-ft so needing to find 76 lbs-ft more.
https://www.motortrend.com/how-to/408-inch-budget-mopar-westech/
I'm wondering what would it take to make a pump gas 365 engine make about 526 lbs-ft @ 4,000 rpm and 514 hp @ 5,900 rpm basically a very similar power curve to the Trick Flow 408 in the dyno graph I'm using as a theoretical goal, doesn't have to use any of the same parts just probably make a very similar power curve basically what heads and intake and what mods would need to be done to them to reach the VE% & efficiencies to have very similar power curves at similar rpms as this 1.29 lbs-ft per cid 408 or as close you think you could get?
A decent 365 should be able to make 450 lbs-ft so needing to find 76 lbs-ft more.
https://www.motortrend.com/how-to/408-inch-budget-mopar-westech/