Windshield molding clips - 2 styles

Having just done this a couple months ago I can state with experience that-

1. The big ones go in the bottom. They should be proud of flush with the sheet metal around 1/16 to 3/32".

2. None of the aftermarket clips work in the stock locations. It seems they are all awful. I was lucky that I saved the originals decades ago (my application is '72 Duster) and bead blasted them so they got a coat of paint and most of them were reused. I still had to drill new holes for some of them as they still sat too high to hold the moldings down but it worked out in the end. Drill & test, seal up the old holes.