727 Help Please

Did you take the front pump and stator support apart or did you just remove the front pump from the trans and leave it as a whole unit? Please post photos of the stator support and pump body separated with the pump gears in the body still. ***I apologize you already said you took it all the way apart. I am getting up for work and forgot you responded to that question lol.

.062 is a little much end play for a race unit. But I wouldn’t expect it to become a neutral box from having that much end play with only a few minutes of run time.

The valve body is a simple turbo action reverse manual non low band apply with only one check ball inside.

I am a little stumped on this one. I would probably be taking the trans fully apart and re checking everything. If you lost pressure, you will see that in the clutches if you ran it for a while while it would not move forward or backward.

I would be making sure the converter is not damaged and that’s the issue. The turbine is what drives the input shaft but needs fluid pressure to do so. So like I said I’m a little stumped with the front pump lugs being in tact.