MSD6AL box compatible Distributors

I have one in the avatar's 408 with an MSD 6AL box. Other than having to set the .008" reluctant gap when new (it was way too wide!), it has been fine. 22 degrees mech advance - I'm at 14 deg at 1000 rpm and 36 total. Vacuum advance not being used but that's about to change.
In case anyone is curious, this is how the Proform distributor looks on my 408:
RPM ADVANCE (all mech/no VA)
1000. 14
1500. 27
2000. 30
2500. 32
3000. 34
3500+ 36

Since I footbrake to 2000 at the starting line, I must be at about the 30 degree mark. The conv flashes to 5000 so you can see I'm well advanced while the engine speed flashes up there. Spark plug reads say the spark is about right hence why I haven't turned it down to 34 degree max from the 36 it has.