Elec woes, crank, no start after running then parked.

Thanks, I haven't checked the carb when it starts to stumble as after the stall there is no spark. I do have an Eddy spacer between 1405 and intake. I will watch carb on next stall.
Are you sure it's not fuel getting too hot? I've only had 2 problems with heat soak, fuel and starter, and your starter works.
Thanks, I've triple chkd gap and it's. 008.
I had a conversion Mopar electronic do similar stuff. Started good cold. Drove it out to get gas and would not restart. After getting the car towed back home I found that the gap, which I didn't check for myself before installing the new to me distrbutor, was set too wide between the reluctor and the pick up coil. Set the gap to 0.008" and everything's been fine since.
Thanks Dave, I think I have that same book lol.
From the MP bible Steve............
View attachment 1716282135
Thanks guys, I'm starting to lean towards a dist pickup issue. The reason I say this is once it stalled, it passed the dist lead tap test. BUT when putting test light on coil -ve there was no flicker/pulse.