Radio bezel
so these are self explanatory
These 2 small screws have to come out too
the arrows point to the screws that go into the 2 standoffs above, you have to remove the nuts from the studs to access the screws.
Where the studs go through the control
these two knobs have to come off (allen wrench)
At least it is not a 67...
There are 3 blade like posts on the back of the bezel that have spring clips to retain them. The blade posts break off just looking at them. then the 2 screws, then the radio knobs then the heater control knobs
so these are self explanatory
These 2 small screws have to come out too
the arrows point to the screws that go into the 2 standoffs above, you have to remove the nuts from the studs to access the screws.
Where the studs go through the control
these two knobs have to come off (allen wrench)
At least it is not a 67...
There are 3 blade like posts on the back of the bezel that have spring clips to retain them. The blade posts break off just looking at them. then the 2 screws, then the radio knobs then the heater control knobs