Difficult cold start

I made compression test. But I wanted to do it with cold engine at first.
So I got 100-110 PSI readings what is quite low result I think.
But at least readings are quite even between cylinders.

I had no time to put spark plugs back and warm engine to take another test with warm engine as manual states.
I think that readings should be better with warm engine?
Service manual says that readings between 110-140 are ok.
Also, regarding manual, crank speed should be at least 130rpm but I have no rpm gauge and for me it seems that crankshaft maybe does not rotate over two rounds per second, but it is of cource difficult to estimate. I am little worried about starter motor as it seems to crank engine quite peacefully even there is no spark plugs in place and I had helper battery connected also.

What do you guys think, is it likely that those compression values are cause to hard cold starting?