Torsion bar adjuster question

Please explain "broke off"? Did the head of the bolt shear off? Is it seized up in the adjuster with the tension fully on? I would recommend getting all the weight off the torsion bar and then find a way to loosen the adjuster. If you just sheared the head, make sure the threads are soaked in PB Blaster or Kroil and see if you can turn it anyway you can get on it. If its really bad, I would weld a nut on the bolt and use it to back it off.

I can give you a procedure if you explain or take a pic of what you are working with.

RGAZ

See above but: You may also need to remove the shock, but I bet it will not go low enough to get it off.