Question about 904 tranny kickdown band adjustment

AJ/FormS said
Yeah; that's something, that without a picture, I don't think anyone here would ever have thought of.
But since we are this far, I'd still like to see how your throttle cable is engineered; cuz in my experience, a factory 2bbl throttle cable, will not index properly with a 4bbl carb, on either intake bracket.

Here's the setup. As you will note, the throttle cable clamp lines up nicely with the throttle cable location, and the whole bracket is bolted to the rear-drivers side carb stud/nut. The lower spring offsets (with tension) the additional cable drag the cable and KD lever resistance that made the pedal too stiff. That spring is in tension only for the initial pedal travel so the pedal feel is typical. I had made a similar bracket for the first KD cable I installed but it didn't have the range of adjustment that this bracket has (part of the Bouchillon kit).