best camshaft brand

Rapid Robert said
undecided on a cam. someone (on here) had priorly suggested 718041-09. RPM range 2300-6000. intake dur at .050 235. ex duration at .050 243. advertized intake duration 289. advertized exhaust duration 297. intake lift .488". exhaust lift .480" lobe seperation 109. it is a 63 dart stock car on a 1/3 mile high banked dirt track. 360/904/5:57 8&3/4. I ain't a cam guy so these are just numbers to me. EDIT that cams' specs say "circle track height rule only", not sure what that means. also a 7K rev limiter is required (tho I dont wanna get anywhere near that) and I almost forgot, the required CR is 9-1 max and will be running EQ heads with the 1.6 ratio

i was somewhat joking about using the cam that i recommended.

given that you have to work within the parameters of the rule book, you'll want to do two things. first figure out what kind of speeds you'll be running, or need to run. then tailor your gearing/tires and chassis to that. with that locked in, then you can sort out the engine on how and where you want to make the power.

i understand that you're hemmed in by the rules: 9:1 comp, 2bbl carb (i'm guessing), and likely you're limited to a max lift.

provide as much information as you can and we can likely put our collective heads together and get something that's at least close to decent!